At the Turn of the Century , 1890 – 1900 , all Antique lighting styles were incorporated. Every conceivable style was used. Combination gas and electric lighting was introduced and within a short period of time gas drifted away and electric lighting became the primary lighting source.

To view more detailed information about each period click on a link below that interests you.

Facilities on Victorian Estates

Gas lights in Victorian homes

Lighting was by gas before electricity was installed in houses. This page describes the gas lamps and explains how they worked using what was called a gas mantle. Firsthand recollections and comments are included from people who lived with these lamps.

____

Extracted from the memoirs of the webmaster's mother(1906-2002) and edited by the webmaster with further research and firsthand contributions from others

Lighting by gas: the latest modern convenience of the time

When I was a child growing up in the early 1900s, we considered ourselves very fortunate that our house had lighting by gas laid on. Few working-class households in the early 1900s had it. (Electric lighting and gas heating and cooking came to our Victorian style terraces much later.) My grandmother only ever had oil lamps and candles, but we lived on a housing estate that was regarded as modern and state-of-the-art at the time. There were gas lights in the streets, too.

The gas ceiling lamp in the above photo shows the chains to control the flow of gas and hence the brightness of the light.

Gas lamps: the bother

Gas lamps were quite a bother to light and had to be lit every time we wanted light. So they were only lit when someone wanted to stay in a room for some time.

For short-term and emergency use, we either moved around in the semi-dark or used candles, lit with matches.

There was always a box of matches and a candle in a candlestick beside our beds at night. We were, though, discouraged from using them, because of the fire hazard and because of dripping wax over the floor or furniture. Anyway our eyes were quite used to the dark and there was some dim light at the front of the house from the gas streetlamp along the road.

We had chamber pots so that we didn't have to go outside to the lavatory at night.

Gas mantles and how gas lights work

Gas lamps worked by heating something called a 'mantle' with a gas flame. The mantle then became white hot and could illuminate a room. Lamps had two chains: one to turn the gas on and the other to turn it off. These chains could also adjust the flow of the gas and hence the brightness of the mantle.

Gas mantles were made from a material that looked like a fine honeycombed silk. When the gas was turned on and lit, it was contained by the mantle bag. Then, at the multitude of holes in the mesh, it met the air and burning took place and the mantle became white hot, so giving out light.

The invention of the gas mantle

The mantle was invented and perfected in Preston, Lancashire, UK, in and around 1817.

Geoff Heath

Not all gas lamps had mantles

Naked flames from gas jets with no mantle

Before Carl Auer von Welsbach invented the gas mantle, all gas lights in homes and in street lights had simple gas jets like the one in the picture from the scullery page. They all pointed upwards.

In the home, these lights were covered with glass globes (or something similar) to look ascetically pleasing and to protect the flame from being blown out. People certainly did not want to entertain friends and family on a Sunday evening in a room with what would look like a medieval torch attached to the wall!

However, this arrangement was extremely inefficient: To get as much light as possible, the gas had to be turned fully up, resulting in large sheets of flame rising towards a ceiling. Also, because the lamp had to be pointed upwards, the illumination was also directed upwards, i.e. at the ceiling rather than where it was needed. So the usable light for a given amount of gas was minimal.

The invention of the gas mantle changed this. It enabled gas lights to have a small flame and to direct their light downwards.

The reason for the gas jet in an old scullery not having a mantel was because it was the old style of gas light. The scullery was a room for cooking, not socialising, so its light did not have to be ascetically pleasing. Set on a wall in the corner of a room, the naked gas jet offered enough light for cooking and cleaning, but, as it didn't have a mantle, it was also relatively robust if it got knocked.

Leon Eckell

The fragility of gas mantles and how to protect them

Gas mantles were extremely fragile, and once they had been heated, they crumbled very easily indeed.

Related links:
The Future of Parking Lot Lighting: Exploring LED Canopy Light Innovations

A gas mantle came from the shop as a small, flat fabric mesh bag which was impregnated with a metal salt. At this stage it wasn't fragile. This changed when first fitted to a gas burner: The bag inflated, the fabric was burnt away and the salt oxidised into a very delicate rigid structure, the same shape but somewhat smaller than the inflated bag.

Mantles could be strengthened by soaking them in vinegar. They were ready for use when dry.

Albert Smith

After first use, mantles were so delicate that the slightest knock made them disintegrate. Partially disintegrated mantles were common, which made the light flicker and produce moving shadows. Then the mantles needed to be replaced.

Neil Cryer

To further protect mantles; to spread their light; and of course for decorative purposes, there was always a glass cover of some sort screwed round them. In our house, this was a globe: the top half was milk-white frosted glass and the lower half was frosted with a pattern on it. There were, though, other colours and shapes.

How gas mantles were bought

Mantles, being so fragile, had to be replaced quite frequently. We bought new ones from the oil shop, each one always in its own cardboard box to protect it.

How gas lamps were lit

We did the lighting with a match through a hole in the bottom of the globe, taking care not to touch the fragile mantle. Some families used wax tapers which were like very thin candles about 8 inches long. These, being longer than matches, were easier to use, although they did have to be lit with a match first or from the fire, and it was all too easy to touch the mantle and for drops of the wax to fall off.

When the gas was lit, it made a popping sound.

Ceiling-style antique gas lamps showing the pipes for carrying the gas for the pilot light, the mantles and the chains to control the flow of gas and hence the brightness of the glowing mantles.

The sound of the gas being lit - fun for children

I have fond childhood memories of Sunday visits to my grandparents who had gas lamps. The highlight of the visit was my being allowed to 'light the gas' with its associated popping sound.

John Lindop

The lamps in some houses, particularly in later years, had pilot lights which were alight all the time and which delivered the gas through a narrow tube. This tube was usually made to weave and curve in exactly the same way as the main supply pipe, so that it looked like part of the decoration, as in the photo below. Such lamps could look very pretty, particularly when they were in a group arrangement.

Gas pipes

The gas for the lamps in most rooms of the house came in through a pipe from the centre of the ceiling, as shown in the above labelled photo. Some, though, had the pipe in the wall.

A gas lamp powered by a gas pipe in the wall

I felt that both were attractive, provided that the mantle was covered by a shade.

In our house, all the pipes were hidden behind the plaster. In some houses and public buildings, though, I saw the pipes running along tops of walls, as if the gas supply had been added as an afterthought. I always thought that this looked very ugly.

The end of gas lights and the arrival of electric lights

Keep gas lighting and don't trust electric lights!

Many houses at the outbreak of World War Two were still using gas for domestic room lighting. My family had the old gas fittings on the wall at 153 Bulwer Road, Edmonton. Although we had been converted to electric lighting by this time, Dad retained all the gas fittings, as he did not trust this new fangled form of lighting by electricity.

Peter Johnson

If you can add anything to this page or provide a photo, I would be pleased if you would contact me.

Unless otherwise stated, the lamps on this page were photographed at the National Museum of Wales.

Text and images are copyright

sources: early 20th century material      sources: ww2 home front and other material     contact
the webmaster/author/researcher/editor     privacy policy